전진켐텍-제품소개
 
 
 
 

In coatings such as primers, alkyd flats, and latex paints. Filler and extender for polymers and elastomers.

 
   
 
 

Reinforcing filler and extender for all elastomers and latices.
Used as a filler in non-black stocks and as an extender in black stocks.
Reinforces and stiffens uncured and cured stocks. Controls shrinkage in adhesive compounds.
Used in coatings, primers, crack fillers and caulking compounds..

 
   
 

Medium binder demand industrial talc for use in interior wall paints, exterior house paints, primers, maintenance paints and traffic paints. Used as filler and extender for elastomers and polymers.

 
   
 
 

For use in interior wall paints, exterior house paints, primers, maintenance paints and traffic paints. Used as filler and extender for coatings and elastomers.

 
   
 
 

Low cost inert filler for all elastomers. Used in non-black stocks of all types. Similar to McNAMEE ® CLAY, except for larger particle size, and lower color brightness.

 
   
 
 

Low cost reinforcer and inert filler for all elastomers. Used in non-black stocks of all types. Lighter color and increases modulus less than DIXIE CLAY.

 
   
 

Interior wall paints, exterior house paints, primers, maintenance paints and traffic paints. Filler for NR, synthetic rubbers, polyolefins and other polymers in specialized applications.

 
   
 
 

Interior wall paints, exterior house paints, primers, maintenance paints, and traffic paints. Filler for NR, synthetic rubbers, polyolefins and other polymers in specialized applications.

 
   
 
 

NYTAL 400 is a super fine talc pigment. Suggested for use in high paint fineness and film smoothness, such as semi-gloss paints. Used as filler and extender for natural and synthetic rubbers in specialized applications.

 
   
 
 

NYTAL 7700 is an ultra fine talc pigment. Suggested for use in paints where high hegman fineness and film smoothness are required, such as semi-gloss paints. Also as filler and extender for natural and synthetic rubbers in specialized applications.

 
   
 
 

Reinforcer and inert filler for all elastorners. Used in non-black compounds of all types.

 
   
 
 

Reinforcer and inert filler for all elastorners. Used in non-black compounds of all types.

 
   
 
 

Inert filler for natural, synthetic and latices where low moisture pick-up is required.

 
   
 
 

I Diluent or carrier for agricultural toxicants. Inert filler and extender for NR and synthetic rubbers and latices for reducing volume costs and where low moisture pick-up is required.

 
   
 
 

Gives maximum brightness of all the PYRAX products. Imparts 뱈ud cracking?resistance to high-build coatings such as texture paints, block fillers, crack fillers and joint cement. Inert filler for natural, synthetic rubber and latices where low moisture pick-up is required.

 
   
 

Functional filler in adhesives, abrasives, ceramics, elastomers, insulating materials, paint, plastics, resins, sealants, and wallboards.

 
   
 
 

Functional filler in adhesives, abrasives, ceramics, elastomers, insulating materials, paint, plastics, resins, sealants, and wallboards.

 
   
 
 

Functional filler in adhesives, abrasives, ceramics, elastomers, insulating materials, paint, plastics, resins, sealants, and wallboards.

 
   
 
 

Effective for gloss control, especially where film smoothness and pigment suspension are important. Filler for polypropylene, especially when good heat aging and retention of physical properties are important.

 
   
 
 

Vantalc F-2003 is a high purity, platey talc to be used for effective stickies control in pulp and paper making. Also can be used as a reinforcing filler for plastics, rubber and paint.

 
   
 
 
 
 
 
 
 
서울시 구로동 구로3동 212-1 에이스테크노 트윈타워1차 6층 TEL. 02-2109-6930 FAX. 02-2109-6940
Contact us Copyright 2006ⓒChunjin-Chemtec Co,Ltd. All Rights Reserved.